PRODUCTS‎

image

It is used for all kinds of feeding, stock and truck loading. Vibro motor is used in the drive system. Feeding can be made from 4 directions at the same time (this application is used for products of 30 square meters and above).

Bunkers are produced in desired sizes (standard types for intermediate stock and intermediate feeding are 15-20-25-30 cubic meters). Standard types for truck loading bunkers are 45-60-100-120 cubic meters.

The flow surfaces of the material are covered with stone lining and there is almost no abrasion on the body sheet. Feeding adjustment can be made very easily from the feeder cover and vibro motors.


MAIN FEATURES

  • Bolted design for ease of assembly and transportation
  • 8 mm wear resistant bolted lining of Hardox 400 material
  • Bracing support legs with NPU 140 material in the form of twist from 8 mm sheet metal
  • Flow direction is in the desired direction thanks to the clack
  • User and maintenance books
    • MODEL CAPACITY ENGINE POWER

    CVB-1020

    200-300 ton/s

    2,2 kW (x2)

    CPG-820

    150-200 ton/s

    1,5 kW (x2)

    TECHNICIAL SPECIFICATIONS

  • Chassis is made of HEA-300 profile
  • The shaker chassis is produced from HEA-300 profile.
  • A1 quality ST-37 sheet
  • Two layers of anti-corrosion and industrial paint
  • ST-37 special twist reinforced sheets
    • MODEL BUNKER VOLUME DIMENSİONS

    CVB-1020

    15-20-25-30-35-40-45

    1000x2000 mm

    CPG-820

    15-20-25-30-35-40-45

    800x2000 mm
    image